2-68 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
TABLE 2-13 lists the setting items and the corresponding shell commands.
Audit trail Set of audit files. The user refers to an audit trail to analyze the information contained
in it.
Audit policy Audit settings. The audit policy mainly defines whether auditing is enabled or
disabled and the management method when audit trail becomes full.
Audit token One field in an audit record. An audit token contains an audit event attribute, such as
"user" or "privilege".
TABLE 2-13 Audit Administration
Item Description
Shell
Command Remarks
Display audit
setting
information
Displays audit settings.
Information on whether access audit is enabled
or disabled and the Audit policy is displayed.
showaudit
Enable/
disable audit,
audit policy
Sets a value for an audit setting.
Specify the following types of audit trail
administration information:
• Enable/disable auditing (Note 1)
• Request the log archive (Note 1)
• Data deletion
Also, specify the audit policy as follows:
• Enable or disable auditing for the specified
user only or for global policy. (Note 2)
• Enable or disable an audit class.
• Enable of disable an audit event.
• Enable or disable auditing for all users
(global policy).
• Specify the destination address for the mail
sent when usage of the local audit file
reaches the threshold.
• Specify the write suspend/count applied
when an audit trail becomes full. (Note 3)
• Specify the local audit file usage threshold
(%) that triggers an alarm when reached.
(Note 4)
setaudit • Specify values for "User,"
"Audit Class," and "Audit
Event" by delimiting them
with the comma in a shell
command.
• You can use up to 128
characters to specify the
mail address. If the
receiving address has a
restriction, check the
settings.
• The default write mode
when an audit trail becomes
full is "count."
• The shell command can set
a maximum of four warning
thresholds delimited by the
comma. The default
warning threshold is 80 (%).
TABLE 2-12 Audit Administration Terms (Continued)
Term Description
To Next Page
Loading...
Need help?
General
