2-88 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
5. Confirm the SNMP settings.
Note – When you changed the SNMP settings back to the default, if the Sun
Management Center (Sun MC) is being used, the SNMP agent information for Sun
MC is also cleared. To set the SNMP agent information for Sun MC again, execute
the setsunmc(8) command with the -s option. For details about the command, see
the XSCF Reference Manual or the man page.
Specifying a User Authentication Algorithm, Creating or Changing an
Authentication/Encryption Password, Copy a User, or Delete a User, All
of Which is USM Management Information
■ Command operation
1. Use the showsnmpusm(8) command to display USM management information.
XSCF> showsnmp
XSCF> showsnmpusm
Username Auth Protocol
-------------- ------------------
yyyyy MD5
user2 MD5
To Next Page
Loading...
