xviii SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Audience
This manual is intended for users, specifically SPARC Enterprise system
management/maintenance administrators. Moreover, the system administrator is
required to have the following knowledge:
■ Solaris
TM
Operating System (Solaris OS) and UNIX command
■ SPARC Enterprise system and basic knowledge of XSCF
Glossary
For the terms used in the “SPARC Enterprise Mx000 Servers Documentation” on
page xx, refer to the Sun SPARC Enterprise M3000/M4000/M5000/M8000/M9000
Servers Glossary.
Structure and Contents of this Manual
This manual is organized as follows:
■ Chapter 1
Provides an overview of the system monitor and control facility (eXtended
System Control Facility, or XSCF).
■ Chapter 2
Explains how to set up XSCF.
■ Chapter 3
Describes how to connect consoles and terminals to this system in order to use
XSCF.
■ Chapter 4
Describes server hardware operation.
■ Chapter 5
Describes how to use the XSCF Shell. The chapter describes how to use
commands and log in with an XSCF user account, and it explains command
errors.
To Next Page
Loading...
Need help?
General
