4-30 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Note – (2) A locator LED that indicates a location. The names of locator LEDs
depend on the corresponding components. For the External I/O Expansion Unit and
LED types and the descriptions of components contained in an External I/O
Expansion Unit, see the External I/O Expansion Unit Installation and Service Manual for
your server.
Displaying a List of External I/O Expansion Units, I/O Boards, Link
Cards, and Power Supply Units or Displaying Their Environment
Information
■ Command operation
● Use the ioxadm(8) command to display a list of External I/O Expansion Units
and downlink card paths and to display information for each component.
<Example 1> Display a list of External I/O Expansion Units and
downlink cards
XSCF> ioxadm list
IOX Link 0 Link 1
IOX@5309 IOU#2-PCI#2 IOU#3-PCI#1
IOX@A3B5 - IOU#1-PCI#1
- - IOU#2-PCI#1
<Example 2> Display a list of External I/O Expansion Units, I/O
ports, link cards, and power supply units
XSCF> ioxadm -v list IOU#1-PCI#1
Location Type FW Ver Serial Num Part Num State
IOX@A3B5 IOX 1.4 CP0001 5016937-01 On
IOX@A3B5/PS0 A195 - PS0001 3001701-02 On
:
<Example 3> Display environment information based on sensor
measurements
XSCF> ioxadm env -te IOX@A3B5
Location Sensor Value Res Units
IOX@A3B5/PS0 T_AMBIENT 28.000 1.000 C
IOX@A3B5/PS0 V_ISHARE 0.632 0.040 V
IOX@A3B5/PS0 I_DC 2.316 0.289 A
IOX@A3B5/PS0 S_FAN_SET 4500.000 300.000 RPM
:
To Next Page
Loading...
Need help?
General
