6-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
FIGURE 6-1 outlines the XSCF mail function.
FIGURE 6-1 XSCF Mail Function
XSCF Email Notification Path
The email notification path is described below. The setting for notification is made
with the XSCF Shell.
â– Sending an email message through the SMTP server
The host name or IP address of the SMTP server must be set.
â– Sending an email with POP authentication or SMTP authentication
It is necessary to specify whether to do the authentication. And the POP
authentication or the SMTP authentication must be selected. Then, ID and password
for the authentication is required.
System
XSCF
Parts fault
Unauthorized
access
SMTP server /
SMTP auth server
POP auth
server
Authenti
cation
Mail server
Internet
Mail terminal
Via SMTP sever
To Next Page
Loading...
Need help?
General
