7-4 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
The following shows data as an example of MIB management information.
Note – This MIB data is provided as an example.
For a list from the extended MIB information supported by XSCF, see Appendix C.
Note – The contents of the MIB definition file are defined using the notations of the
ASN1 standard.
The XSCF extension MIB definition file defines the administration information for
the SNMP manager to monitor the M3000/M4000/M5000/M8000/M9000 servers. To
perform server monitoring, install the XSCF extension MIB definition file to the
SNMP manager. For the method of installation, see the manuals of the SNMP
manager in use. For details on obtaining the XSCF extension MIB definition file and
the Fault Management MIB definition file, see “Preface” on page xvii.
scfMachineType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "System model name and model type name."
::= { scfInfo 1 }
scfNumberOfCpu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of CPUs"
::= { scfInfo 2 }
scfSysSerial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "System serial number"
::= { scfInfo 3 }
To Next Page
Loading...
Need help?
General
