Chapter 2 Setting Up XSCF 2-41
Note – PEM: Abbreviation for Privacy Enhanced Mail. Mail to be sent is encrypted
for increased privacy.
Enabling or Disabling the LDAP Server
â– Command operation
1. Use the showlookup(8) command to display the lookup method of
authentication and user privileges.
2. Use the setlookup(8) command to enable or disable the LDAP server.
3. Use the showlookup(8) command to confirm the lookup method.
Specifying an LDAP Server, Port Number, Bind ID, Bind Password,
Search Base (BaseDN) and Search Time (Timeout Period)
â– Command operation
1. Use the showldap(8) command to display LDAP client settings.
XSCF> showlookup
Privileges lookup: Local only
Authentication lookup: Local and LDAP
<Example> Enable the use of LDAP server for both user
authentication and user privilege.
XSCF> setlookup –a ldap
XSCF> setlookup –p ldap
XSCF> showlookup
Privileges lookup: Local and LDAP
Authentication lookup: Local and LDAP
XSCF> showldap
Bind Name: Not set
Base Distinguished Name: Not set
LDAP Search Timeout: 0
Bind Password: Not set
LDAP Servers: Not set
CERTS: None
To Next Page
Loading...
Need help?
General
