81
APPENDIX B. ACCESSORIES
The following accessories are available for the P-1000 Micropipette Puller. See
http://www.sutter.com
for more detail and availability P-1000 accessories, and for part
numbers not expressed in the following list.
Filaments
FB215B, FB220B, FB230B Box Filaments: 2.0mm square, 1.5, 2.0, or 3.0 mm wide
FB255B, FB245B Box Filaments: 2.5mm square, 2.5 or 4.5 mm wide
FB315B, FB320B, FB330B Box Filaments: 3.0mm square, 1.5, 2.0, or 3.0 mm wide
FT315B, FT320B, FT330B,
FT345B
Trough Filaments: 1.5, 2.0, 3.0, or 4.5 mm wide
FILAMENT Platinum/iridium custom. Please contact Sutter Instrument for
more information.
FS1875 Platinum/iridium sheet, 18 x 75 x 0.05 mm (0.002in)
Capillary Glass Tubing
Several sizes and types of borosilicate and aluminosilicate glass tubes are available. Please
refer to Sutter Instrument’s web site (www.sutter.com
) for a list of part numbers.
Other Accessories
FPS Spacer for special procedures (e.g., fire polishing)
GS Glass stop (installs on either puller bar)
CTS Ceramic tile for scoring glass (large tips, 20-200 microns)
PET
Pipette examining tile
BX10 Pipette storage box: Holds 10 pipettes
Box dimensions: 4 3/4 x 3 5/8 x 3/4 inches (12.065 x 9.2075 x 1.905 cm)
BX20 Pipette storage box: Holds 20 pipettes
Box dimensions: 7 x 3 5/8 x 3/4 inches (17.78 x 9.2075 x 1.905 cm)
V400101 Drierite: 1 pound (0.45 kg) refill bottle
P-1000 FLAMING/BROWN MICROPIPETTE PULLER SYSTEM OPERATION MANUAL – REV. 3.02 (20161118)
To Next Page
Loading...