23
3. INSTALLATION
3.1 Unpacking
Make certain that you have received all of the following items in the P-1000 shipping box:
P-1000 micropipette puller
*
Power cord
Sample box containing the following types of glass:
BF100-50-10 (Microinjection)
BF150-86-10 (Thick-Walled Patch (dissocated or cultured cells))
BF150-110-10 (Thin-Walled Patch (slice or whole tissue))
One spare heating filament (FB255B)
Warranty registration
Sutter Instrument Product Catalog
P-1000 & P-97 Pipette Cookbook
Glass Stop
BX-10 Pipette Storage Box
Parameter Guide “cheat sheet” card
The Model P-1000 micropipette puller is shipped to you in a custom box with foam inserts.
Please save shipping materials for future use. Should it ever be necessary to ship the puller
to another location, the same packaging should be used to prevent damage to the instrument.
Additional packing material may be purchased from Sutter Instrument Company.
IMPORTANT: Improper packaging is a form of abuse and, as such, can be responsible for
voiding the warranty where shipping damage is sustained because of such packing.
3.2 Setting Up
3.2.1 Line Power (Mains)
The P-1000 is designed to operate with a mains power of 110–220 V AC, at 50-60 Hz. The
power cord provided with the P-1000 connects the grounded mains power outlet to the Power
Entry Module located on the back of the unit (see diagram below). This Module also includes
the Line Fuse.
*
Unless specified otherwise, the P-1000 is shipped equipped with, and pre-programmed for, a 2.5mm box heating filament.
P-1000 FLAMING/BROWN MICROPIPETTE PULLER SYSTEM OPERATION MANUAL – REV. 3.02 (20161118)
To Next Page
Loading...