ENGINE 3-57
BEARING INSPECTION
Rotate the bearing inner race by finger to inspect for abnormal
play, noise and smooth rotation while the bearings are in the
crankcase.
Replace the bearing in the following procedure if there is any-
thing unusual.
BEARING REASSEMBLY
• Install the bearing into the crankcase with the special tool.
[ 09913-70210: Bearing installer set
OIL SEAL DISASSEMBLY
• Remove the oil seal with the special tools.
[
1 09913-70210: Bearing remover set
2 09913-85210: Bearing remover
[ 09913-50121: Oil seal remover
Play
Play
To Next Page
Loading...
