CHASSIS 9-17
• Remove the fuel tank cap.
• Remove the fuel inlet mounting screws.
NOTE:
When removing the screws, close the fuel cap in order to pre-
vent the screws and washers from falling in the fuel inlet.
For E-28
• Remove the fuel tank cap.
• Remove the fuel inlet mounting screws and tray
2.
NOTE:
When applying a tool to the mounting screw, turn the lower part
of cushion
3 over.
• Remove the screws.
• Remove the turn signal light socket and combination light
socket.
• Remove the frame covers.
• Unclamp the harness in the back of the frame cover.
To Next Page
Loading...
