9-18 CHASSIS
FOOT BOARD
• Remove the following parts.
Pillion rider handles (9-15)
Trunk box cover (9-16)
Frame covers (9-16)
Right/left leg side covers (9-12)
Front box (9-18)
• Remove the screws on the cooling duct.
• Remove the foot board.
FRONT BOX
• Remove the following parts.
Maintenance lid (9-13)
Handlebar covers (9-8)
Front panel (9-8)
Leg shield (9-10)
Screws in the box
• Disconnect the power source coupler.