Suzuki GSX1300R - Page 180

1A-109 Engine General Information and Diagnosis:
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the air cleaner box. Refer to “Air Cleaner Box
Removal and Installation in Section 1D (Page 1D-6)”.
3) Check the PAIR control solenoid valve coupler (1) for
loose or poor contacts.
If OK, then measure the PAIR control solenoid valve
resistance.
4) Disconnect the PAIR control solenoid valve coupler.
5) Measure the resistance between terminals.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
PAIR control solenoid valve resistance
20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
(Terminal – Terminal)
Is the resistance OK?
Go to Step 2. Replace the PAIR
control solenoid with a
new one. Refer to “PAIR
Control Solenoid Valve
Removal and
Installation in Section
1B (Page 1B-10)”.
1
I823H1110096-01
(A)
I823H1110097-01