Suzuki GSX1300R - Clutch Installation

Clutch: 5C-17
Clutch Installation
B815H25306017
Installation is in the reverse order of removal. Pay
attention to the following points:
• Install the thrust washer onto the countershaft.
NOTE
The chamfer side “A” of the thrust washer
faces crankcase side.
• Install the oil pump drive gear to the primary driven
gear assembly.
NOTE
The off-set side “B” of the oil pump drive
gear faces the primary driven gear side.
• Install the primary driven gear assembly.
NOTE
• If it is difficult to install the primary driven
gear, rotate the crankshaft.
• Be sure to engage the oil pump drive and
driven gears, primary drive and driven
gears.
• Install the bearing (1) and spacer (2) and apply engine
oil to them.
• Install the trust washer (3).
“A”
I815H1530051-02
“B”
I823H1530037-01
“B”
“B”
I823H1530038-02
1
3
2
I815H1530053-02