Suzuki GSX1300R - Wheel Balance Check and Adjustment; Specifications; Service Data

Wheels and Tires: 2D-18
Wheel Balance Check and Adjustment
B815H22406014
Check and adjust the wheel balance in the following
procedures:
1) Removal the wheel assembly. Refer to “Front Wheel
Assembly Removal and Installation (Page 2D-4)”
and “Rear Wheel Assembly Removal and Installation
(Page 2D-11)”.
2) Remove the mounting drum from the rear wheel.
(For rear wheel)
Refer to “Rear Wheel Assembly Removal and
Installation (Page 2D-11)”.
3) Check the wheel balance using the balancer and
adjust the wheel balance if necessary.
CAUTION
!
For operating procedures, refer to the
instructions supplied by the wheel balancer
manufacturer.
4) When installing the balancer weight to the wheel, set
the balancer weight on center rib of the wheel.
5) Recheck the wheel balance.
6) Install the mounting drum to the rear wheel. (For rear
wheel)
Refer to “Rear Wheel Assembly Removal and
Installation (Page 2D-11)”.
7) Install the wheel assembly. Refer to “Front Wheel
Assembly Removal and Installation (Page 2D-4)”
and “Rear Wheel Assembly Removal and Installation
(Page 2D-11)”.
Specifications
Service Data
B815H22407001
Wheel
Unit: mm (in)
Tire
I823H1240057-01
Item Standard Limit
Wheel rim runout
Axial
— 2.0 (0.08)
Radial
Wheel axle runout
Front
— 0.25 (0.010)
Rear
Wheel rim size
Front 17 M/C x MT3.50 —
Rear 17 M/C x MT6.00 —
Item Standard Limit
Cold inflation tire pressure
(Solo/Dual riding)
Front
290 kPa (2.90 kgf/cm
2
, 42 psi) —
Rear
Tire size
Front 120/70 ZR17M/C (58 W) —
Rear 190/50 ZR17M/C (73 W) —
Tire type
Front BRIDGESTONE BT015F RADIAL M —
Rear BRIDGESTONE BT015R RADIAL M —
Tire tread depth
(Recommended depth)
Front — 1.6 mm (0.06 in)
Rear — 2.0 mm (0.08 in)