Suzuki GSX1300R - Schematic and Routing Diagram; EVAP Canister Hose Routing Diagram

Emission Control Devices: 1B-8
Schematic and Routing Diagram
EVAP Canister Hose Routing Diagram (Only for E-33)
B815H21202001
4
8
11
1
8
9
10
5
1
“B”
“A”
2
4
3
3
7
6
6
8
1
4
7
2
7
5
I815H1120007-01
1. Fuel shut-off valve 8. Clamp
: The ends of the clamp should face upward.
2. TPC valve 9. Clamp
: The ends of the clamp should face backward.
3. EVAP canister 10. White paint
: White paint marking on the surge hose should face backward.
4. Surge hose 11. White paint
: White paint marking on the surge hose should face upward.
5. Pruge hose “A”: Pass the surge hose over the battery (–) cable.
6. EVAP pruge system control solenoid valve “B”: Pass the purge hose under the battery (–) cable.
7. Clamp
: The ends of the clamp should face outside.