Suzuki GSX1300R - Special Tools and Equipment; Recommended Service Material; Specifications; Tightening Torque Specifications

6B-13 Steering / Handlebar:
Specifications
Tightening Torque Specifications
B815H26207001
NOTE
The specified tightening torque is also described in the following.
“Handlebar Components (Page 6B-1)”
“Handlebar Construction (Page 6B-2)”
“Steering Components (Page 6B-5)”
“Steering Damper Construction (Page 6B-6)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B815H26208001
NOTE
Required service material is also described in the following.
“Handlebar Components (Page 6B-1)”
“Handlebar Construction (Page 6B-2)”
“Steering Components (Page 6B-5)”
“Steering Damper Construction (Page 6B-6)”
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Handlebar clamp bolt 10 1.0 7.0 )(Page 6B-3)
Steering stem nut 45 N⋅m (4.5 kgf-m, 32.5 lb-ft) then turn back
1/2 – 1/4
)(Page 6B-8)
Steering stem lock-nut 80 8.0 58.0 )(Page 6B-9)
Steering stem head nut 90 9.0 65.0 )(Page 6B-9)
Handlebar holder mounting nut 35 3.5 25.5 )(Page 6B-9)
Steering damper bolt 23 2.3 16.5 )(Page 6B-10)
Steering damper nut 23 2.3 16.5 )(Page 6B-10)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 6B-4) / )(Page 6B-
8) / )(Page 6B-9)
Handle grip bond Handle Grip Bond (commercially
available)
— )(Page 6B-4)