2B-5 Front Suspension:
Front Suspension Adjustment
B815H22206003
After installing the front fork, adjust the spring pre-load
and two kinds of damping force as follows:
WARNING
!
Adjust the left and right front forks to the
same setting.
Spring Pre-load Adjustment
• There are five grooved lines on the side of the spring
adjuster.
Position 0 provides the maximum spring pre-load and
position 5 provides the minimum spring pre-load.
• Turn the adjustment (1) to the desired position.
STD position
3-1/2 (6 turns out from the maximum position)
Damping Force Adjustment
NOTE
Make sure to check the 1st click position by
the last click sound when turning in the
adjuster.
Rebound damping force
Fully turn the damping force adjuster (2) clockwise. From
that position (stiffest), turn it out to standard setting
position.
STD position
8 clicks out from stiffest position
Compression damping force
Fully turn the damping force adjuster (3) clockwise. From
that position (stiffest), turn it out to the standard setting
position.
STD position
8 clicks out from stiffest position
[A]: Position 0
[B]: Position 3-1/2 (STD: 6 turns out)
[C]: Position 5 (10 turns out)
1
I815H1220011-01
0
0
1
2
3
4
5
0
1
2
3-1/2
[A]
[C]
[B]
I815H1220012-04
2
I815H1220013-01
3
I815H1220014-01