Combination Meter / Fuel Meter / Horn: 9C-1
Body and Accessories
Combination Meter / Fuel Meter / Horn
General Description
Combination Meter System Description
B815H29301001
This combination meter mainly consists of the stepping motor, LCD (Liquid Crystal Display) and LED (Light Emitting
Diode).
The speed, engine RPM, fuel and engine coolant temperature pointers are driven by the stepping motor.
The LCDs indicate Gear position, Drive mode, Clock and Odo / Trip 1 / Trip 2 / FI (DTC) respectively.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less power consuming and more resistant to vibration resistance compared to the
bulb.
Engine Revolution Indicator Light
This speedometer is equipped the engine revolution indicator light. The engine revolution indicator light is adjustable
from 4 000 – 11 500 r/min. (from 4 000 r/min to 8 000 r/min, every 500 r/min and 8 000 r/min to 11 500 r/min, every 250
r/min: Initial setting: 10 000 r/min)
A
B
C
1 2 3 5 6 7 8 9
11
10
12
13
14 15 16 17 18 19
4
2
I815H1930001-01
1. Fuel meter 11. Engine coolant temperature meter
2. LED (Turn signal indicator light) 12. LED (Engine coolant temperature indicator light)
3. Tachometer 13. LED (Engine RPM indicator light)
4. LCD (Gear position indicator) 14. LED (FI indicator light)
5. LED (Fuel indicator light) 15. LCD (Engine RPM indicator)
6. LED (Neutral indicator light) 16. SEL button
7. LED (Oil pressure indicator light) 17. LCD (Odo / Trip 1 / Trip 2 / FI)
8. LCD (Clock) 18. ADJ button
9. LCD (Drive mode indicator) 19. LED (High-beam indicator light)
10. Speedometer