Suzuki GSX1300R - Radiator; Cooling Fan Motor Removal and Installation

1F-6 Engine Cooling System:
6) Move the radiator forward.
7) Always apply compressed air from the engine side.
8) Reinstall the removed parts.
Radiator / Cooling Fan Motor Removal and
Installation
B815H21606004
Removal
1) Remove the side cowlings. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
14)”.
2) Drain engine coolant. Refer to “Cooling System
Inspection in Section 0B (Page 0B-13)”.
3) Disconnect the reservoir tank hose (1).
4) Remove the radiator reservoir tank (2).
5) Disconnect the radiator inlet hose (3), water air bleed
hose (4) and cooling fan motor lead wire coupler
(right) (5).
6) Disconnect the cooling fan motor lead wire coupler
(left) (6) and radiator outlet hose (7).
7) Remove the radiator assembly (8) by removing the
bolts.
8) Remove the cooling fan motors (9) from the radiator.
I815H1160007-01
1
2
I815H1160008-01
3
5
4
I815H1160009-01
6
7
I815H1160010-01
8
8
8
I815H1160011-02
9
I815H1160012-01