Suzuki GSX1300R - Front Wheel Dust Seal; Bearing Removal and Installation

2D-7 Wheels and Tires:
Front Wheel Dust Seal / Bearing Removal and
Installation
B815H22406005
Removal
1) Remove the front wheel assembly. Refer to “Front
Wheel Assembly Removal and Installation
(Page 2D-4)”.
2) Remove the dust seals (1) using the special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
3) Remove the bearings (2) using the special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
4) Remove the spacer (3).
Installation
CAUTION
!
The removed dust seals and bearings must
be replaced with new ones.
1) Apply grease to the wheel bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
(A)
I823H1240013-01
(B)
2
I823H1240014-01
3
I823H1240015-01
I649G1240019-02