Suzuki GSX1300R - Specifications; Service Data; Tightening Torque Specifications

2B-13 Front Suspension:
Specifications
Service Data
B815H22207001
Suspension
Unit: mm (in)
Tightening Torque Specifications
B815H22207002
NOTE
The specified tightening torque is also described in the following.
“Front Fork Components (Page 2B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Item Standard Limit
Front fork stroke 120 (4.7) —
Front fork spring free length 263 (10.4) 257 (10.1)
Front fork oil level (Without spring,
outer tube fully compressed)
95 (3.7) —
Front fork oil type SUZUKI FORK OIL L01 or an equivalent fork oil —
Front fork oil capacity (Each leg) 532 ml (18.0/18.7 US/lmp oz) —
Front fork inner tube O.D 43 (1.7) —
Front fork spring adjuster 3-1/2 grooves from top —
Front fork damping force adjuster
Rebound
8 clicks out from stiffest position —
Compression
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front fork cap bolt 23 2.3 16.5 )(Page 2B-3)
Front fork lower clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork upper clamp bolt 23 2.3 16.5 )(Page 2B-3)
Handlebar holder mounting nut 35 3.5 25.5 )(Page 2B-4)
Front fork damper rod bolt 23 2.3 16.5 )(Page 2B-9)
Front fork inner rod lock-nut 15 1.5 11.0 )(Page 2B-12)