Suzuki GSX1300R - License Plate Light Removal and Installation; License Plate Light Bulb Replacement

Lighting Systems: 9B-7
License Plate Light Removal and Installation
B815H29206012
Removal
1) Remove the frame cover. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
14)”.
2) Disconnect the license plate light coupler (1).
3) Remove the license plate light (2).
Installation
Install the license plate light in the reverse order of
removal. Pay attention to the following point:
• Tighten the license plate light mounting nuts (1) to the
specified torque.
Tightening torque
License plate light mounting nut (a): 5 N·m (0.5
kgf-m, 3.5 lb-ft)
License Plate Light Bulb Replacement
B815H29206013
1) Remove the license plate light mounting nuts (1).
2) Remove the lens by removing the screws.
3) Replace the bulb (1).
4) Reinstall the removed parts.
1
I815H1920023-01
2
I815H1920045-01
(a)
1
I815H1920025-01
1
I815H1920026-01
I815H1920027-01
1
I815H1920028-01