Suzuki GSX1300R - Special Tools and Equipment; Recommended Service Material

Exhaust System: 1K-8
Specifications
Tightening Torque Specifications
B815H21B07001
NOTE
The specified tightening torque is also described in the following.
“Exhaust System Construction (Page 1K-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B815H21B08001
NOTE
Required service material is also described in the following.
“Exhaust System Construction (Page 1K-2)”
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
HO2 sensor 25 2.5 18.0 )(Page 1K-5)
Exhaust pipe bolt
23 2.3 16.5
)(Page 1K-6) /
)(Page 1K-7)
Exhaust pipe mounting bolt
23 2.3 16.5
)(Page 1K-6) /
)(Page 1K-7)
Muffler connecting bolt 23 2.3 16.5 )(Page 1K-7)
Muffler mounting bolt 25 2.5 18.0 )(Page 1K-7)
Muffler joint nut 25 2.5 18.0 )(Page 1K-7)
Material SUZUKI recommended product or Specification Note
Muffler seal MUFFLER SEAL LOCTITE 5920
(commercially available) or
equivalent
— )(Page 1K-6)