Suzuki GSX1300R - Page 467

Wheels and Tires: 2D-8
2) First install the right wheel bearing, then install the
spacer (1) and left wheel bearing with the special
tool.
Special tool
(A): 09924–84510 (Bearing installer set)
CAUTION
!
The sealed cover of the bearing must face
outside.
3) Install the dust seals with the special tool.
Special tool
(B): 09913–70210 (Bearing installer set)
4) Apply grease to the lip of dust seals.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the front wheel assembly. Refer to“Front
Wheel Assembly Removal and Installation
(Page 2D-4)”.
1. Spacer “a”: Clearance
(A)
I649G1240020-03
Left
Right
Left
Right
)
“a”
(A)
(A)
1
I823H1240058-02
(B)
I823H1240016-01
I823H1240017-01