1B-1 Emission Control Devices:
Engine
Emission Control Devices
Precautions
Precautions for Emission Control Devices
B815H21200001
Refer to “General Precautions in Section 00 (Page 00-1)”.
General Description
Fuel Injection System Description
B815H21201001
GSX1300R motorcycles are equipped with a fuel injection system for emission level control. This fuel injection system
is precision designed, manufactured and adjusted to comply with the applicable emission limits. With varying engine
conditions, all of the fuel injection volumes are precisely controlled by the programmed injection maps in the ECM to
reduce CO, NOX and HC. Adjusting, interfering with, improper replacement, or resetting of any of the fuel injection
components may adversely affect injection performance and cause the motorcycle to exceed the exhaust emission
level limits.
1
“C”
“A”
“B”
6
2
3
7
4
5
9
8
I815H1120001-01
1. Fuel tank 5. Fuel delivery pipe 9. Secondary fuel injector
2. Fuel pump 6. Fuel pressure regulator “A”: Before-pressurized fuel
3. Fuel mesh filter (For low pressure) 7. Fuel filter (For high pressure) “B”: Pressurized fuel
4. Fuel feed hose 8. Primary fuel injector “C”: Relieved fuel
To Next Page
Loading...
