1D-21 Engine Mechanical:
15) Disconnect the HO2 sensor lead wire coupler (9)
and oil pressure switch lead wire (10).
16) Loosen the muffler connecting bolts.
17) Remove the mufflers.
18) Remove the exhaust pipe mounting bolt.
19) Remove the exhaust pipe assembly.
20) Remove the exhaust pipe gaskets (11).
21) Disconnect the starter motor lead wire (12) and
engine ground lead wire (13).
22) Disconnect the ECT sensor lead wire coupler (14) .
9
10
I815H1140075-01
I815H1140076-01
I815H1140077-01
I815H1140078-01
I815H1140079-01
11
I815H1140080-01
12
13
I815H1140081-01
14
I815H1140082-01