1G-10 Fuel System:
3) Remove the bolts.
4) Lift and support the fuel tank with the prop stay.
5) Disconnect the fuel pump lead wire coupler (2).
6) Place a rag under the fuel feed hose (3) and
disconnect the fuel feed hose from the fuel tank.
CAUTION
!
When removing the fuel tank, do not leave
the fuel feed hose on the fuel pump side.
7) Disconnect the fuel tank drain hose (4).
8) Disconnect the surge hose (5). (For E-33)
9) Disconnect the fuel tank breather hose. (Except for
E-33)
10) Remove the fuel tank by removing its bracket bolts.
11) Remove the fuel shut-off valve (6) and surge hose
(7) from the fuel tank. (For E-33)
Installation
Install the fuel tank in the reverse order of removal.
NOTE
Connect the fuel feed hose to the fuel pump
until it locks securely (a click is heard).
I815H1170012-01
I815H1170013-01
2
3
I815H1170015-01
5
4
I815H1170014-01
I815H1170016-01
7
6
I815H1170025-01
To Next Page
Loading...
