Suzuki GSX1300R - Page 371

Fuel System: 1G-13
11) Remove the bushing (12) and lead wires (13).
Assembly
Refer to “Fuel Mesh Filter Inspection and Cleaning
(Page 1G-14)”.
Assemble the fuel tank pump in the reverse order of the
disassembly. Pay attention to the following points:
CAUTION
!
• To prevent fuel leakage, the bushing and
O-ring must be replaced with new ones.
• Apply engine oil lightly to the bushing and
O-ring.
• Connect all lead wires securely so as not to cause
contact failure.
• Install a new O-ring and apply grease to it.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
WARNING
!
The O-ring must be replaced with a new one
to prevent fuel leakage.
12
13
I823H1170018-05
I823H1170019-01
I823H1170020-01
1. Fuel pump (+) lead wire (BI)
2. Fuel level gauge (+) lead wire (R)
3. Fuel pump (–) lead wire (B)
4. Fuel level gauge (–) lead wire (B)
5. Ground lead wire
1
2
I815H1170022-01
3
5
4
I815H1170023-01
I815H1170024-01