Suzuki GSX1300R - Page 473

Wheels and Tires: 2D-14
2) First install the right wheel bearing, then install the
spacer (1) and left wheel bearing with the special
tools.
Special tool
(A): 09941–34513 (Steering race installer)
(B): 09924–84510 (Bearing installer set)
CAUTION
!
The sealed cover of the bearing must face
outside.
3) Install a new dust seal with the special tool.
Special tool
(C): 09913–70210 (Bearing installer set)
4) Apply grease to the dust seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the rear sprocket mounting drum assembly.
6) Install the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation
(Page 2D-11)”.
1. Spacer “a”: Clearance
(B)
(A)
I649G1240030-02
Left
Right
Left
Right
“a”
1
(A)
(A)
(B)
(B)
(B)
(B)
I815H1240012-05
(C)
I823H1240025-01
I823H1240026-01
I823H1240027-01