Suzuki GSX1300R - Page 51

Maintenance and Lubrication: 0B-21
Chassis Bolt and Nut Inspection
B815H20206024
Tighten chassis bolt and nut
Initially at 1 000 km (600 miles, 2 months) and every
6 000 km (4 000 miles, 12 months) thereafter
Check that all chassis bolts and nuts are tightened to
their specified torque.
1 Steering stem head nut 90 N⋅m (9.0 kgf-m, 65.0 lb-ft)
2 Handlebar holder mounting bolt 35 N⋅m (3.5 kgf-m, 25.5 lb-ft)
3 Front fork cap bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
4 Front fork upper clamp bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
5 Front fork lower clamp bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
6 Front brake master cylinder mounting bolt 10 N⋅m (1.0 kgf-m, 7.0
lb-ft)
7 Union bolt (Front brake) 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
(a)
1
(b)
2
I815H1020053-01
(c)
3
(c)
5
(c)
4
I815H1020054-01
(c)
7
(d)
6
I815H1020055-02
8 Clutch master cylinder mounting bolt 10 N⋅m (1.0 kgf-m, 7.0 lb-ft)
9 Union bolt (Clutch) 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
10 Rear shock absorber mounting nut (Upper) 50 N⋅m (5.0 kgf-m,
36.0 lb-ft)
11 Rear shock absorber mounting nut (Lower) 50 N⋅m (5.0 kgf-m,
36.0 lb-ft)
12 Cushion lever mounting nut 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
13 Cushion rod mounting nut 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
(d)
8
(c)
9
I815H1020056-01
(e)
10
I815H1020057-01
(f)
13
(f)
13
(f)
12
(e)
11
I815H1020058-01