Service Data: 0C-11
Tightening Torque Chart
For other bolts and nuts not listed in the preceding page, refer to this chart:
Handlebar clamp bolt 10 1.0 7.0
Master cylinder holder bolt (Upper and Lower) 10 1.0 7.0
Front brake caliper mounting bolt 39 3.9 28.0
Front brake caliper housing bolt 22 2.2 16.0
Front brake pad mounting pin 15 1.5 11.0
Brake hose union bolt 23 2.3 16.5
Clutch master cylinder mounting bolt 10 1.0 7.0
Clutch hose union bolt 23 2.3 16.5
Air bleeder valve (Front) 7.5 0.75 5.5
Air bleeder valve (Rear) 7.5 0.75 5.5
Brake disc bolt (Front) 23 2.3 16.5
Brake disc bolt (Rear) 35 3.5 25.5
Rear brake caliper mounting bolt 17 1.7 12.5
Rear brake pad mounting pin 15 1.5 11.0
Rear brake master cylinder mounting bolt 10 1.0 7.0
Rear brake master cylinder rod lock-nut 18 1.8 13.0
Rear brake caliper sliding pin 33 3.3 24.0
Brake lever pivot bolt 6 0.6 4.5
Brake lever pivot bolt lock-nut 6 0.6 4.5
Swingarm pivot shaft 15 1.5 11.0
Swingarm pivot nut 100 10.0 72.5
Swingarm pivot lock-nut 90 9.0 65.0
Cushion lever mounting nut 78 7.8 56.5
Cushion rod mounting nut 78 7.8 56.5
Rear shock absorber mounting nut 50 5.0 36.0
Rear axle nut 100 10.0 72.5
Rear sprocket nut 60 6.0 43.5
Rear master cylinder rod lock-nut 18 1.8 13.0
Air bleeder valve (Clutch) 6 0.6 4.5
Clutch master cylinder holder bolt 10 1.0 7.0
Clutch lever pivot bolt 1.0 0.1 0.7
Clutch lever pivot bolt lock-nut 6.0 0.6 4.5
Clutch release mounting bolt 10 1.0 7.0
Item N⋅mkgf-mlb-ft
Bolt Diameter
“a” (mm)
Conventional or “4” marked bolt “7” marked bolt
N⋅mkgf-mlb-ft N⋅mkgf-mlb-ft
4 1.5 0.15 1.0 2.3 0.23 1.5
5 3 0.3 2.0 4.5 0.45 3.0
6 5.5 0.55 4.0 10 1.0 7.0
8 13 1.3 9.5 23 2.3 16.5
10 29 2.9 21.0 50 5.0 36.0
12 45 4.5 32.5 85 8.5 61.5
14 65 6.5 47.0 135 13.5 97.5
16 105 10.5 76.0 210 21.0 152.0
18 160 16.0 115.5 240 24.0 173.5
321
“a”
“a”
“a”
I649G1030001-04
1. Conventional bolt 2. “4” marked bolt 3. “7” marked bolt
To Next Page
Loading...
