3-90 ENGINE
• Tighten the clutch shoe nut to the specified torque while hold-
ing the generator rotor with the special tool.
"
# Clutch shoe nut: 130 N·m (13.0 kgf-m, 94.0 lb-ft)
( 09930-44541: Generator rotor holder
• Stake to clutch shoe nut with a center punch.
• Install the clutch springs and clutch release plate.
• Tighten the clutch spring bolts diagonally.
• Install the clutch release arm
8, clutch release roller guide
9
and washer
0.
The clutch shoe nut has left-hand threads.
To Next Page
Loading...
