Suzuki LT-F500F 2002 - Page 183

4-34 DRIVE TRAIN
• Apply grease to the seal lip groove.
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Apply 4 – 5 gram of water resistance grease to the outside of
seal lip groove.
%99000-25160: WATER RESISTANCE GREASE
• Fix the parking gear with the new snap rings.
• Install the drive shaft into its housing by tapping with a plastic
mallet.
• Apply grease to the new O-ring in the waterproof seal’s collar.
• Install the waterproof seal with collar and washer, then install
the new snap ring.
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Apply hypoid gear oil to the coupling joint splines and install
the coupling joint to the pinion gear shaft.
• Coat a new O-ring with grease and apply sealant to the mat-
ing surface of the housing, then install the rear drive shaft
housing.
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
& 99104-31140: SUZUKI BOND “1207B” (USA)
' 99000-31110: SUZUKI BOND “1215” (Others)