3-10 ENGINE
• Adjust the brake pedal height as shown.
% Brake pedal height
A
Standard: 5 – 15 mm (0.2 – 0.6 in)
Brake pedal (!2-15)
• Install the new gasket and tighten the exhaust pipe nuts tem-
porally.
• Apply gas sealer to the exhaust pipe connector.
EXHAUST GAS SEALER: PERMATEX 1372
• Apply THREAD LOCK “1342” to the muffler mounting bolt
A.
• Tighten the muffler mounting bolts and exhaust pipe bolts to
the specified torque.
& 99000-32050: THREAD LOCK “1342”
# Muffler connecting bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe nut: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the gearshift arm.
NOTE:
Align the no teeth position on the gearshift arm with the no teeth
position on the reverse shift shaft.
To Next Page
Loading...
