Suzuki RM-Z250 - Cylinder Removal

CYLINDER HEAD, CYLINDER AND PISTON 6-7
• Remove the cylinder head base nuts C.
• Loosen the cylinder base bolt D.
• Remove the cylinder head bolts E.
NOTE:
When loosening the cylinder head bolts E, loosen each bolt lit-
tle by little diagonally.
• Remove the cylinder head F.
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic hammer.
• Remove the cylinder head gasket G, dowel pins H and cam
chain No.1 guide I.

CYLINDER REMOVAL
• Remove the cylinder head. (6-6)
• Remove the cylinder 2 by removing the cylinder base bolt 1.

NOTE:
If the cylinder does not come off easily, lightly tap it using a plas-
tic hammer.
• Remove the cylinder gasket 4 and dowel pins 5.
Do not drop the dowel pins H and cam chain J into
the crankcase.
Do not drop the cam chain 3 into the crankcase.