Suzuki RM-Z250 - Primary Driven Gear and Clutch Sleeve Hub

7-8 CLUTCH
PRIMARY DRIVEN GEAR AND
CLUTCH SLEEVE HUB
REMOVAL
• Remove the clutch cover. (7-3)
• Remove the pressure plate and clutch plates. (7-3, -4)
• Flatten the lock washer 1.
• Hold the clutch sleeve hub 3 with the special tool and loosen
the clutch sleeve hub nut 2.
 09920-53740: Clutch sleeve hub holder
09920-31020: Extension handle
• Remove the nut 2, lock washer 1 and clutch sleeve hub 3.
• Remove the washer 4 and primary driven gear 5.
• Remove the needle bearing 6 and spacer 7.