LUBRICATION SYSTEM 11-3
ENGINE OIL LEVEL INSPECTION
(2-12)
ENGINE OIL CHANGE
(2-13)
ENGINE OIL FILTER CHANGE
(2-14)
OIL PRESSURE CHECK
(2-42)
OIL STRAINER REMOVAL
OIL STRAINER No.1 (2-15)
OIL STRAINER No.2 (2-15)
OIL STRAINERS INSPECTION
(2-16)
OIL STRAINER INSTALLATION
OIL STRAINER No.1 (2-17)
OIL STRAINER No.2 (2-17)
OIL REED VALVE REMOVAL
(10-5)
OIL REED VALVE INSPECTION
• Inspect the oil reed valve for wear and damage.
• If any defects are found, replace the oil reed valve with a new
one.
OIL REED VALVE INSTALLATION
(10-16)
OIL SEAL REMOVAL
• Remove the right crankcase cover. (8-3)
• Remove the snap ring 1.
09900-06108: Snap ring remover (Close type)
• Remove the oil seal 2.
To Next Page
Loading...
