Suzuki RM-Z250 - Rear Caliper Removal and Disassembly

FRONT AND REAR BRAKES 17-11
REAR CALIPER REMOVAL AND
DISASSEMBLY
• Remove the disc cover 2 by removing its bolts 1.
• Remove the caliper protector 4 by removing its bolts 3.
• Place a rag under the brake hose union bolt 5 to catch spilled
brake fluid.
• Disconnect the brake hose 6 by removing the union bolt 5.
• Remove the rear wheel. (16-7)
• Remove the caliper.
• Remove the brake pad. (17-6)
• Remove the spring 7.
• Remove the caliper bracket 9 from the caliper 8.
• Remove the boots 0 and A.
• Remove the spring B.
• Remove the rear brake caliper axle bolt (bracket) C.