CLUTCH 7-11
CLUTCH RELEASE CAMSHAFT
REMOVAL
• Remove the clutch cover and its gasket. (7-3)
• Remove the pressure plate and push rod. (7-3)
• Remove the retainer 2 by removing its bolt 1.
• Disconnect the clutch cable 3.
• Pull the clutch release camshaft 4 out of crankcase.
INSPECTION
CLUTCH RELEASE CAMSHAFT
• Inspect the clutch release camshaft for abnormal deflection
and damage.
• If any defects are found, replace the release camshaft with a
new one.
OIL SEAL AND BEARING
• Inspect the oil seal 1 for oil leakage and oil seal lip damage.
• Inspect the bearings 2 for play and smooth movement.
• If necessary, replace the defective parts with a new one.
(10-9 to -12)
To Next Page
Loading...
