TRANSMISSION AND CRANKSHAFT 10-11
BEARING REMOVAL AND INSTALLATION
REMOVAL
• Remove the oil seals. (10-9)
• Remove the bearing retainers 1, 2.
• Remove the bearings (3, 4, 5, 6, 7, 8) with the special
tool.
Bearing 3, 7: 37 Attachment
Bearing 4, 8: 40 Attachment
Bearing 5: 42 Attachment
Bearing 6: 32 Attachment
09913-70210: Bearing installer set (10 – 75 )
• Remove the bearing 9 with the special tool.
09921-20240: Bearing remover set
Bearing 9: Remover 17 mm
Replace the bearing with new a one.
To Next Page
Loading...
