Suzuki RM-Z250 - Throttle Body Removal

13-8 FUEL SYSTEM AND THROTTLE BODY
REMOVAL
• Remove the seat and radiator covers. (5-2)
• Remove the fuel tank. (13-2, -3)
• Disconnect the TP sensor coupler 1 and condenser coupler
2.
• Remove the condenser 3.
• Disconnect the hot starter cable 4 from the throttle body.
• Loosen the throttle body clamp screws 5.
• Move the air cleaner backward.
• Move the throttle body assembly left side.
• Disconnect the IAP sensor coupler 6 and fuel injector cou-
pler 7.