Suzuki RM-Z250 - Disc Plate Replacement

FRONT AND REAR WHEELS 16-5
• Install new bearings 2 with the special tool, using the suitable
spacer A match for the outside dimension of bearings.
 09924-84510: Bearing installer set
NOTE:
* Install the left side (disc side) bearing first and then the right
side bearing.
* After installing the bearings, inspect the bearings for smooth
movement.
a Clearance
• Install new dust seals 1 and apply grease to their lips.
NOTE:
When installing the dust seal 1, place the manufacturer’s code
indicated side of the dust seal outside.
 09913-70210: Bearing installer set (10 – 75 )
Bearing:  40 Attachment
 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
DISC PLATE REPLACEMENT
• Remove the disc plate 2 by removing its bolts 1.
• Apply THREAD LOCK SUPER to the disc plate bolts 1.
99000-32110: THREAD LOCK SUPER “1322”
or equivalent
• Tighten the disc plate bolts 1 to the specified torque.
 Disc plate bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
Left Right