Suzuki RM-Z250 - Installation

7-12 CLUTCH
INSTALLATION
Install the clutch release camshaft 1 in the reverse order of
removal. Pay attention to the following points:
• Apply SUZUKI MOLY PASTE to the clutch release camshaft.
 99000-25140: SUZUKI MOLY PASTE or equivalent
• Apply grease to the oil seal lip.
 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
• Install the clutch release camshaft 1 and connect the clutch
cable 2.
• Install the push rod and pressure plate. (7-7)
• Install the clutch cover and its gasket. (7-7)
• Install the retainer 3 and tighten the retainer bolt 4.
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (2-12)
• Clutch cable play (2-20)
• Smooth operation of clutch system