8-6 KICK STARTER
• Install the guide 9 to the kick starter shaft.
NOTE:
Align the concave B of guide with kick starter shaft hole A.
• Install the kick starter 0 onto the kick starter shaft.
NOTE:
When installing the kick starter 0, align the wide spline teeth C
and D.
• Install the spring A to the kick starter shaft.
• Apply MOLYBDENUM OIL SOLUTION to the stopper portion
E of the kick starter and F of the stopper guide.
MOLYBDENUM OIL SOLUTION
• Install the kick starter shaft assembly onto the crankcase.
NOTE:
Securely engage the stopper portion E of the kick starter with
the stopper guide F.
• Hook the end of return spring to the crankcase hole G.
To Next Page
Loading...
