GEARSHIFTING 9-9
• Install the GP switch 4 and tighten the bolts 5 to the speci-
fied torque.
GP switch mounting bolt: 6.5 N·m (0.65 kgf-m, 4.7 lbf-ft)
• Install the front chain guide plate 6 and engine sprocket
cover 7.
• Tighten the engine sprocket cover bolts 8 to specified torque.
Engine sprocket cover bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Route the GP switch lead wire properly. (20-20)
To Next Page
Loading...
