REAR SUSPENSION 19-23
4: Stamped mark d: 4.0 mm (0.16 in)
Tightening torque:
F: 70 N·m (7.0 kgf-m, 50.5 lbf-ft)
* Improperly reassembled rear suspension linkage bolts can interfere with suspension move-
ment and damage the rear suspension linkage.
* Make sure that the rear shock absorber rebound damping adjuster on the bottom bracket of
the rear shock absorber is located to the right side.
* Insert the rear suspension linkage bolt 3 from the left side. Make sure that the nut B is in the
recess of the rear shock absorber bottom bracket.
Left Right
To Next Page
Loading...
