iii
About this Manual:
The CQM1 is a compact, high-speed Programmable Controller (PC) designed for advanced control
operations in systems requiring from 16 to 256 I/O points per PC. There are two manuals describing the
setup and operation of the CQM1: The
CQM1 Operation Manual
(this manual) and the
CQM1 Program-
ming Manual
. Also available is the
CQM1-series Dedicated I/O Units Operation Manual
.
This manual describes the system configuration and installation of the CQM1 and provides an basic
explanation of operating procedures for the Programming Consoles and introduces the capabilities of the
Ladder Support Software (LSS) and SYSMAC Support Software (SSS). Read this manual first to acquaint
yourself with the CQM1.
The
CQM1 Programming Manual
provides detailed descriptions of the CQM1’s programming functions.
The
Ladder Support Software Operation Manual
and the
SYSMAC Support Software Operation Manual:
C-series PCs
provides descriptions of LSS and SSS operations for the CQM1 and C-series PCs. Use
Version-3 LSS or a later version for CQM1 operation.
Please read this manual carefully and be sure you understand the information provide before attempting
to install and operate the CQM1.
Section 1
gives a brief overview of the steps involved in developing of a CQM1 System, describes the
possible system configurations, and describes the CQM1’s special features and functions.
Section 2
describes the Units that go together to create a CQM1 PC and provides information on switch
settings, installation, and hardware maintenance. Technical specifications of the Units are also provided.
Section 3
describes LSS/SSS capabilities, how to connect the Programming Console, and how to per-
form the various Programming Console operations.
Section 4
describes how to diagnose and correct the hardware and software errors that can occur during
PC operation.
The
Appendix
provides tables of CQM1 Units and related products.
WARNING Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
!
To Next Page
Loading...
Need help?
General