11.2.6 Fire-UP/Switch-OFF Procedures
The following procedures best practices are suggested with the aim to reduce the risks of damages to the
electronics due to hard electrical spikes.
Best Practices in Fire-UP/Switch-OFF
Whenever is possible plug-in the jump battery BEFORE toggling the Main switch in MAIN ON position.
It is recommended to switch-off the engine by pushing Start button on the Steering wheel, alternatively
toggle the Main switch in the middle position (MAIN ON).
Avoid to toggle the Main switch impulsively from IGNITION ON to MAIN OFF (or vice versa), it may cause
serious damages to the electronics due to hard electrical spikes.
Use the jump battery whenever possible, in example during box/pre-grid activity that needs the car
switched on (MAIN ON/IGNITION ON).
See the following pictures as best practices reference.
To Next Page
