5. Unscrew and remove the two shoulder bolts (24-01-033). Do not unscrew one bolt first and then
the other. Loose the bolts gradually, keeping the balance on the two bolts.
2.10.3 HALO painting and certification
It is reminded the HALO is a type 1 component. As stated by the FIA technical regulation:
“Type 1: These parts must be supplied by the manufacturer and used exactly as supplied. Repairs may be
carried out only by the manufacturer.”
“The adding of color or thin adhesive film up to a thickness of 0.5 mm is not considered as a modification,
provided that the color or film fulfils only an optical function.”
By the requirements above, it is not allowed to the team/customer to remove the paint from the HALO,
please note it comes from Tatuus only painted black.
In addition, by FIA requirement the HALO must be equipped with a homologation label and FIA hologram.
Both the label and the hologram must only be fitted by Tatuus.
The homologation label and the hologram must be visible, they cannot be covered by wrapping or paint. It is
suggested to protect the homologation label and the hologram with a transparent film (i.e., helicopter tape).
If the hologram needs to be re-placed or re-fitted, the HALO should come back to Tatuus for inspection and
re-certification. Please get in contact with Tatuus for timeline and quote for the activity.
To Next Page
